Sanken CS-3E Shotgun Microphone
Microphones (Wired)
Hire Costs
Per Day
Per Week
Collect from Welsh Back the afternoon before (from 4pm), return by 11am the day after. Delivery on request. Prices ex VAT.
More InfoOften hired with the Sanken CS-3E Shotgun Microphone
-
Zoom H6 £25 a day
-
Sound Devices MixPre 6 Audio Recorder £30 a day
-
Rode 3m Boom Pole £8 a day
-
Rode 2m Boom Pole £5 a day
-
XLR 5m £1 a day
-
XLR 10m £2 a day
-
Headphones & Cable £4 a day
At a Glance
FAQ
OVERVIEW
Location and Studio Shotgun Featuring Exceptional Off-axis Rejection
・ Location and studio shotgun featuring exceptional off-axis rejection
・ Unique design combination of line mic array and second pressure gradient method
・ Very sharp pinpoint directivity
・ Provides rich human voice characteristics
The CS-3e stands out among shotgun microphones because it maintains directivity over an extremely wide frequency range, especially in the low frequencies. Because of its unique design, the CS-3e is an excellent choice for use in difficult applications, such as close-to-ceiling positions or locations near a noisy camera. Even in such challenging situations, the excellent side and rear rejection of the CS-3e helps to capture only the targeted dialogue without ambient reverberation problems. The CS-3e delivers sharp directional sound even in the lower frequencies. Sanken's original design results in a low proximity effect which facilitates working in a scene close-up and wide, while producing little change in sound character.
In the CS-3e, three directional capsules are arranged in a front-back array to combine line microphone performance and second-order pressure gradient response in a single system. With this unique design, the CS-3e achieves phenomenal supercardioid directivity in the lowest frequencies and throughout the full range in a microphone only 27cm (10 inches) in length. It is significant that the CS-3e picks up the targeted frontal sound sources with exceptional clarity over a wide frequency range - even in noisy ambient environments or in long reverberation spaces - by rejecting undesired noise and sounds coming from the rear and sides.
TECH SPECS
| Directivity | Super Cardioid / lobar |
| Transducer | DC biased condenser |
| Frequency Range | 50Hz - 20kHz |
| Sensitivity (nominal at 1kHz) | 50mV/Pa (-26dB,0dB=1V/Pa) |
| Equivalent Noise Level (A-weighted) | 15dB-A |
| Max SPL (1% THD) | 120dB SPL |
| Output Impedance at 1KHz | 120 ohms |
| Powering | +48±4V phantom |
| Current Consumption | less than 2.5mA |
| Surface Finish | Matte black |
| Connector | XLR-3M |
| Dimensions | 27.0 cm X 1.9 cm (diameter) |
| Weight | 0.12 kg |
INSURANCE / REPLACEMENT VALUE
£1,083.82 EX VAT (CVP October 2018))
