Rode NTG-2
Microphones (Wired)
Hire Costs
Per Day
Per Week
At a Glance
FAQ
OVERVIEW
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from an AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
TECH SPECS
| Power: | P48 (48V) phantom supply or 1.5V AA battery |
| Acoustic Principle: | Line gradient |
| Directional Pattern: | Super Cardioid |
| Frequency range: | 20Hz-20kHz, selectable HPF @ 80Hz/12dB/octave |
| Output impedance: | 250 Ohm (phantom), 350 Ohm (battery) |
| Signal noise ratio: | 76 dB SPL (A - weighted per IEC651) |
| Equivalent noise: | 18 dB SPL (A - weighted per IEC651) |
| Maximum SPL: | 131dB SPL (@ 1kHz, 1% THD into 1K Ohm load) |
| Maximum output voltage: | -15.4dBu (@ 1kHz, 1% THD into 1K Ohm load) |
| Sensitivity: | -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight: | 161gm |
| Dimensions: | 278mmH x 22mmW x 22mmD |
INSURANCE / REPLACEMENT VALUE
£202.50 EX VAT Plus shipping (CVP 24/10/18)