The Odyssey7Q+ is the most advanced, most capable, most versatile monitor/recorder in the world. The Odyssey7Q+ can record HD/2K/UHD/4K. It can record them via SDI and HDMI. It can record RAW (with Record Options), uncompressed DPX, and Apple ProRes 422 (HQ). The Odyssey7Q+ features an OLED 1280x800 monitor with true blacks, accurate colours, extended colour gamut and a 176-degree viewing angle.
Along with the best image in the industry, the Odyssey7Q+ also features an extensive array of image analysis tools, including an RGB waveform, RGB Histogram, False Colour, Pixel Zoom with finger drag, three-mode Focus Assist and monitoring LUTs.
The unique Multi-Stream Monitoring mode allows up to four HD video inputs to be viewed at once in a quad-split view or to be live-switched between in full screen. The Odyssey7Q+ weighs a little over one pound, is just one inch thick and can run on any power source from 6.5-34 volts.
From rapid wake-up to power protection, Convergent Design 2.5” SSDs don’t miss a frame. Our premium drives have proven reliability. All Odyssey SSDs are individually tested by Convergent Design for full compatibility with the Odyssey monitor/recorders. Failures of Odyssey SSDs are nearly nonexistent. In the initial testing phase, Convergent Design has rejected just 0.2% of the assembled units before shipping them to clients.
Odyssey SSDs are available in 256GB, 512GB and 1TB capacities. Other memory systems with similar speed capabilities but without the data protection of the Odyssey SSDs are comparable in price. Some memory devices can be many times the cost, and others do not offer the reliability of solid state media.
SUSTAINED READ/WRITE SPEEDS
From burst length to cue depth, there is a bevvy of technical considerations taken to ensure maximum performance.
POWER LOSS PROTECTION
Convergent Design SSDs will recover and close clips in the event of a lost power. Sata Adapter Not Included: See USB 3.0 SSD Adapter. Also recommended, Seagate GoFlex Thunderbolt Adapter (STAE121)
MANUFACTURED IN THE USA
At Convergent Design we take great pride in the products we design and manufacture. Our products are developed, designed, manufactured, tested and serviced in our facility in Colorado Springs, CO by product designers, engineers and technicians that truly care about the quality and commitment that goes into every unit.
You can take pride in knowing that your Convergent Design device is manufactured to the highest possible standards and supported by our commitment to quality and customer satisfaction.
ODYSSEY7Q+ POWER & BATTERY
The Odyssey7Q+ is supplied with a Convergent Design AC power supply (replacement part CD-OD-AC-PS). This is a universal switching power supply that can be used throughout the world, and comes complete with several interchangeable plug connectors. Only use a Convergent Design AC power supply on the Odyssey7Q+. The Odyssey7Q+ can accept DC power ranging from 6.5-34v. Depending on monitor and record modes, the power draw from the Odyssey7Q+ can range from 8-15w.
There has been a significant upgrade to the Odyssey 7Q+ models including the features below:
RAW BUNDLE (Please note this is a paid for extra)
Now includes all RAW recording options previously as separate options:
APOLLO OPTION (Please note this is a paid for extra)
Monitor, record and live switch up to four simultaneous HD signals via four SDI inputs or three SDI and ont HDMI input. A fifth channel is recorded with either the live switch or quad split view:
|Display||7.7 OLED, 1280x800, RGB 8-bit panel, ~16 million colors, wide gamut, 3400:1 contrast ratio, 176 viewing, true blacks|
|SDI Video I/O||HD-SDI/1.5G / 3G support: Single/Dual/Quad Link inputs (HD/2K/Ultra-HD & 4K supported), Dual HD-SDI 1.5G outputs, Full-size BNCs|
|HDMI Video Input||HDMI I/O Version 1.4b support, 8-bit, up to 1080p60 422, up to 30 fps in Ultra-HD (3840 x 2160) and up to 24 fps in 4K (4096 x 2160)|
|HDMI Video Output||HDMI I/O Version 1.4a support, 8-bit, up to 1080p30 422|
|OLED Monitor||Vertical Auto-Flip (defeatable), Adjustable Color to match other monitors calibration, Adjustable Saturation|
|Digital Audio I/O||2-channel SDI or HDMI embedded audio (48KHz, 24-bit)|
|Analog Audio I/O||3.5mm port for line level 2-channel unbalanced or 1-channel balanced input up to -10dB, 48KHz, 24-bit, 3.5mm stereo headphone output, adjustable|
|User Interface||Capacitive Touchscreen, three mechanical keys|
|Sound Level||Silent, no fan or vents, no RF emissions|
|DC Power Input||6.5 to 34VDC with built-in reverse polarity protection; locking power connector, built-in power switch|
|Power Draw||8 watts (monitor only), 9 to 18 watts (depending on selected record mode)|
|Weight and Size||560 grams / 1.2 lbs., 7.9x 6.1x 1.0 (200 x 155 x 25 mm),|
|-10 to +40c (Operating), -20 to +70c (storage)|
|Recording Media (Dual SSD Slots)||Convergent Design Premium 2.5 SSDs with power-loss protection, in 256GB, 512GB and 1 TB sizes, 420Mb/sec write, 500Mb/sec read speed, compatible with USB 3.0 and Thunderbolt Adapters. SSDs and adapters sold separately.|
|Recording Formats(Base Odyssey7Q+)||Compressed formats:|
|4K/UHD 10-bit YCC 422 up to 30 fps, in Apple ProRes 422 HQ|
|2K/1080p 10-bit YCC 422 up to 60 fps, in Apple ProRes 422 HQ|
|1080i 10-bit YCC 422 up to 60i, in Apple ProRes 422 HQ|
|720p 10-bit YCC 422 up to 60 fps, in Apple ProRes 422 HQ|
|2K/1080p RGB 10/12-bit 444 up to 30fps, in DPX File Format|
|1080p RGB 10-bit 444 up to 60fps, in DPX File Format|
|** Available in the future via a free firmware update. All specifications are subject to change without notice.|
£1,550.00 excl. VAT and Shipping (CVP Price List April 2016)